how to order

	10FT BOXED or 5M BOXED : Color boxes are available for 10ft or 5M length MAXTOP chain.
	REELED (Small Size) : Chain are packed by plastic reel for small size chain from Ansi#25500ft through Ansi#50100ft length.
	REELED (Medium Size) : Chain are packed by wooden reel for larger size, start from Ansi#60*50ft less than a weigh 100kg
	REELED (Pallet Size) : When ordering a long length of chain, which weight exceeds 130kg, chain would be packed by pallet size wooden reel. A maximum allowable weight for this type of packing is 800kg per length.
One connecting link is included with each 10` of chain.

	CONNECTING LINK (Spring Clip Type ) : Spring clip type is standard for small pitch chains through size #60. Similar to the pin link, except that the detachable plate is slip-fitted to the pins and retained by a spring clip.
	CONNECTING LINK (Cotter Pin Type) : Cotter type is standard for #80 chain through #240 chain. Similar to the pin link except that the detachable plate is slip-fitted to the pins and retained by cotter pins.
	CONNECTING LINK (Cotter Pin Type) : Similar to the cotter type connecting link, except the detachable plate is retained by one single long cotter pin. Supplied when required.
	OFFSET LINK (Standard : Single-Pitch Offset Link) : When a strand of chain consists of an odd number of pitches, an offset link is needed to assemble the chain. Assembly is simple, and chains can be custom fit to your power transmission needs. (Also known as a half link). Consists of two offset link plates, one special pin, one bushing and one roller. The pin is slip-fitted and retained by a cotter pin.
	TWO-PITCH OFFSET LINK : Consists of an offset link and a roller link permanently riveted together. The Pin is press fitted to the offset link plated. Standard for 1/4 inch pitch (Ansi#25) and smaller chains.
	ROLLER LINK : (ISO Inner link) Consists of two bushings press fitted to each of the link plates and two rollers. Just enough clearance is provided for the rollers to turn freely over the bushings. The same roller links are used for both single and multiple strand chains.
	PIN LINK: (ISO Outer link) Permanent outside link that cannot be removed. Consists of a U-link (two pins and two pin link plates assembly) and a press fit plate. The pins are press fitted to both plates and riveted after assembly.