DOUBLE-PLUS CHAIN

REGULAR CHAIN

CHAIN NO.	Pitch		Width	Roller			Plate		Pin			Average Ultimate Strength kgf	Approx Weight kg/m
	P		W	Height	Dia		Height	Thick.	Dia	Lengths
	inch	mm	mm	W1	R	R1	H	T	D	F	G
C2050-JDS＊	1.25"	31.75	27.40	12.60	30.60	19.05	14.60	2.00	5.06	19.20	20.70	3000	1.40
C2060H-TDS	1.50"	38.10	40.60	20.00	37.00	17.80	17.10	3.10	5.95	28.05	29.45	4200	2.10
C2060H-JDS	1.50"	38.10	33.10	15.50	36.50	22.50	17.10	3.10	5.95	24.15	25.85	4200	2.00

SOLID(SBR-L)CHAIN

CHAIN NO.	Pitch		Width	Roller			Plate		Pin			Average Ultimate Strength kgf	Approx Weight kg/m
	P		W	Height	Dia		Height	Thick.	Dia	Lengths
	inch	mm	mm	W1	R	R1	H	T	D	F	G
C2050 SBR-L JDS＊	1.25"	31.75	27.40	12.60	30.60	19.05	14.60	2.00	5.06	19.20	20.70	3000	1.43
C2060H SBR-L TDS	1.50"	38.10	40.60	20.00	37.00	17.80	17.10	3.10	5.95	28.05	29.45	4200	2.14
C2060H SBR-L JDS	1.50"	38.10	33.10	15.50	36.50	22.50	17.10	3.10	5.95	24.15	25.85	4200	2.04

Standardized:Outerplates are Nickel Plating; Inner plates are ZincPlating;

Big Center Roller out of engineering plastic, Nylon 66; Small Roller out of engineering plastic, POM90

Electro-conductive Type Big Center Roller available at request.

＊Snap cover top available at size C2050 at request.

SNAP COVER(CVR)-

Snap covers have been developed to prevent small objects. example screws chips. from jamming the conveyor line.

This is currently available on size C2050 JDS & C2050 SBR-L JDS

(Patended:M279422)

Comparison between Regular Chain with Solid(SBR-L) Chain
Regular Chain	Solid(SBR-L) Chain

Disadvantage Construction is loose.	Advantage Long bush is inlayed into side-plate; solid construction reduced chain wearing and noise during operation. A bearing area shared by bush from pin is increased. Bush is fixed; when large roller is turning, a wear out mainly to be applied on bush and slightly only on pin.